|
|
Energizer Jumpstart All-In-One
|
In Stock
Item Number: 84020
Manufacturer: Energizer
Manufacturer Part No: 84020
|
|
Convenience takes on a whole new meaning with
the efficient, reliable and user-friendly Energizer 84020 All-In-One 12V
18Ah Battery Jumpstarter with Air Compressor and Power Inverter.
Powered by an internal 12-volt, 18Ah sealed lead-acid battery capable of
delivering 400 CA, it is designed to quickly and safely deliver
automotive power on three fronts: battery jump-starting power, air
compression for tire inflation and untethered AC and DC current suitable
for most any appliance or gadget. Covering virtually any temporary
power requirement, the Energizer All-In-One provides all the power
needed for any getaway.
An easy-to-use, safe, portable power for jumpstarts, air compression and AC/DC power.
Jumpstarting Your Car
In the event of a dead or severely drained battery the Energizer
All-In-One Jumpstarter allows you to get back on the road in minutes by
simply following three color-coated steps numbered on the outside of the
unit. It's as easy as 1: assuring that the unit has a sufficient charge
by pressing the CHECK button; 2: attaching the color-coded positively
and negatively charged 24" power output jumper cables, via their
heavy-duty, spark-resitant battery clamps, to the appropriate positively
charged post on your car's dead battery and a ground position on your
engine block; 3: turning the power switch located in the clearly marked
JUMP section of the controls from OFF to JUMP, and starting the car with
the dead battery. When your vehicle starts and has run at an idle for a
few minutes remove the All-In-One Jumpstarter cables in the reverse
order they were connected, turn off the unit and you are ready to roll.
Air Compressor
The only physical connection any car has with the road is through
its tires. Because of this correct tire pressure can affect
everything from improved gas mileage, to correct handling
on the road and the avoidance of unnecessary exposure of
tires to the possibility of puncture or blowouts due to
underinflation. The air compressor built into the Energizer
All-In-One Jumpstarter easily addresses these issues by
funneling its portable power into the ability to fill tires whenever
the need or want arises. When sufficiently charged, the unit
is capable of inflating most any automobile tire within 10
minutes, and is easy and safe to use with its ON/OFF switch
and built-in pressure gauge located on the front of the
unit. The compressor also is thermally protected from
overheating, and has a strong, fabric-covered output hose
with a screw-on valve stem coupler.
Rugged construction, convenient cable storage and manual circuit breaker protection.
DC/AC Power and Light When and Where You Need It
Along with its automotive exclusive functionality, the Energizer
All-In-One Jumpstarter provides all the power and access to power that
you will ever need. The unit comes standard with two 12-volt DC
cigarette sockets for powering 12V accessories. Both are protected by a
30-amp manual-reset circuit breaker, located at the back ensuring that
your devices are never exposed to more power than they can safely
handle. In addition, users also have convenient access to three-pronged
AC power by way of the built-in 200 watt, DC/AC power inverter. This
component also contains a built-in cooling fan to prevent any
overheating during this power conversion and an ON/OFF AC power switch
to minimize the possibility of power drain when cords are left plugged
in. The All-In-One Jumpstarter also contains a flex-neck work light
stored in the unit's handle that allows the user to shine a little light
virtually any place.
Flex-neck work light, shines light wherever you need it.
Easy to Maintain Power Levels
Because even the best jumpstarter unit is of little use unless it
contains sufficient power, the Energizer Jumpstart All-In-One is
designed to be easy to charge and effortless to maintain. Unlike other
manufacturer's units that can be damaged by overcharging, the Energizer
Jumpstart All-In-One contains a 12V, 1 amp internal two-stage charger
that allows your battery's power to fluctuate within a very small range
while attached to AC current for charging. At the highest level of this
range through the middle, charging ceases, while when the lowest is
reached charging begins again, continuing until the highest level is
reached. This creates a charging cycle, yet cuts the battery off from
the damaging effects of excess power. This means that the unit can
safely be connected to a wall outlet indefinitely, ensuring that the
unit will be ready to pop into your trunk at full power whenever you
want it.
Key Features
- Rugged polypropylene case
- 12V, 18Ah sealed lead-acid battery capable of delivering 350 CA
- Flex-neck work light
- Large, easy-to-use ON/OFF rotary switch to prevent sparking
- 4 AWG output cables with 24" reach
- Two 12V cigarette sockets for powering 12V accessories; protected with a 30A manual-reset circuit breaker
- Battery status indicator to signify the charge-state of the internal battery
- 12V,
1 amp internal battery charger; charger has 2-stages so the charger can
be connected to the wall outlet indefinitely, allowing the internal
battery to be maintained at full charge at all times.
- Battery charge indicator to signify when the internal battery is charging ad when it is fully charged
- "Shorted clamps" audio alarm
- "Reverse polarity" audio alarm
- 200 watt, DC/AC power inverter internally mounted; has ON/OFF switch, one AC power outlet; fan cooled
- Internal air compressor capable of inflating an automobile tire in 10 minutes
- Pressure
gauge and ON/OFF switch on outside, and compressor is thermally
protected from overheating, has a strong, fabric-covered output hose
with screw-on valve stem coupler
|
|
|