|
|
Energizer Jumpstart 400 - 84022
|
In Stock
Item Number: 84022
Manufacturer: Energizer
Manufacturer Part No: 84022
|
|
Convenience takes on a whole new meaning with
the efficient, reliable and user-friendly Energizer Jumpstarter 400
12-volt Battery Jumpstarter. Powered by a large lead-acid battery
capable of putting out 400 CA, it is designed to quickly and safely
deliver automotive power on two fronts: battery jump-starting power and
untethered DC current suitable for most any appliance or gadget. It also
contains a rear inverter docking feature for AC power when used with
the Energizer 200w inverter (sold separately). In either configuration,
the Energizer 12-Volt 400 Battery Jumpstarter provides the reassurance
of power you can count on while on the road.
Jumpstarting Your Car
In the event of a dead or severely drained battery the Energizer
Jumpstart 400 allows you to get back on the road in minutes by simply
following three color-coated steps numbered on the outside of the unit.
It's as easy as 1: assuring that the unit has a sufficient charge by
pressing the CHECK button; 2: attaching the color-coded positively and
negatively charged 24" power output jumper cables, via their heavy-duty
400A metal battery clamps, to the appropriate positively charged post on
your car's dead battery and a ground position on your engine block; 3:
turning the power switch located in the clearly marked JUMP section of
the controls from OFF to JUMP, and starting the car with the dead
battery. When your vehicle starts and has run at an idle for a few
minutes remove the Jumpstart 400's cables in the reverse order they were
connected, turn off the unit and you are ready to roll.
Standard DC Power and Optional AC As Well
Along with its automotive exclusive functionality, the Energizer
Jumpstart 400 provides the power and access to power that users of
modern devices need on the road. The unit comes standard with one
rear-oriented 12-volt DC socket suitable for powering 12V devices
utilizing a cigarette lighter adapter. Devices plugged into this are
protected by a 30-amp manual-reset circuit breaker located at the back,
that ensures that they are never exposed to more power than they can
safely handle. In addition, the unit's rear inverter dock functionality
means that user's also have the option of access to three-pronged AC
power by way of Energizer's 200w Inverter, sold separately.
Access to optional AC power with additional accessory.
Easy to Maintain Power Levels
Because even the best jumpstarter unit is of little use unless it
contains sufficient power, the Energizer Jumpstart 400 is designed to be
easy to charge and effortless to maintain. Unlike other manufacturer's
units that can be damaged by overcharging, the Energizer Jumpstart 400
contains a two-stage internal charger that allows your battery's power
to fluctuate within a very small range while attached to AC current for
charging. At the highest level of this range through the middle,
charging ceases, while when the lowest is reached charging begins again,
continuing until the highest level is reached. This creates a charging
cycle, yet cuts the battery off from the damaging effects of excess
power. This means that the unit can safely be connected to a wall outlet
indefinitely, ensuring that the unit will be ready to pop into your
trunk at full power whenever you want it.
Key Features
- Large sealed lead-acid battery providing 350 CA
- Rugged polypropylene case
- Low center-of-gravity for stability during use
- 4AWG copper cables, 24" reach
- Heavy-duty, 400A metal battery clamps
- Two-stage
internal charger allows jumpstarter to remain connected to wall outlet
indefinitely; keeping internal battery charged at all times
- Large, comfortable handle
- Reverse-polarity audio alarm
- Internal battery charge-state indicator
- Internal battery charging indicator
- 12-volt DC cigarette socket outlet; protected by 30A circuit breaker
- Convenient inverter docking feature for optional Energizer 200w inverter sold separately
|
|
|